RaspberryPi/Wireless: Difference between revisions

Latest revision as of 23:58, 12 August 2017

See Linux/Wireless/1 for method 1 and Linux/Wireless/2 for method 2.

@@ Line 1: / Line 1: @@
-To connect to a WPA wireless network from a Raspberry Pi:
+See [[Linux/Wireless/1]] for method 1 and [[Linux/Wireless/2]] for method 2.
-First add network configuration to /etc/wpa_supplicant/wpa_supplicant.conf
+{{PiFlag}}
+{{KaliFlag}}
-<pre>
+{{LinuxFlag}}
-ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
-update_config=1
-network={
-    ssid="Your SSID Here"
-    proto=RSN
-    key_mgmt=WPA-PSK
-    pairwise=CCMP TKIP
-    group=CCMP TKIP
-    psk="YourPresharedKeyHere"
-}
-</pre>
-Next edit /etc/network/interfaces and modify the wlan0 entry.
-If you have a static IP:
-<pre>
-# ------ Static IP --------
-###allow-hotplug wlan0
-iface wlan0 inet manual
-wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
-iface default inet static
-    address 10.1.2.20
-    netmask 255.255.255.0
-    network 10.1.2.0
-    gateway 10.1.2.1
-</pre>
-If you have an automatically-assigned IP from the DHCP controller:
-<pre>
-# ------- DHCP ------------
-###allow-hotplug wlan0
-iface wlan0 inet manual
-wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
-iface default inet dhcp
-</pre>