Revision as of 00:10, 19 August 2020

~~Ubuntu/Bespin/Second AP Tunnel~~ - this ended in failure, twice. short version: you can't have multiple simultaneous PIA tunnels in OpenVPN without significant extra configuration, so no need to go this above and beyond.

~~Ubuntu/Bespin/Wifi Repeater~~ - using bespin to run hostapd and make a wifi repeater

@@ Line 41: / Line 41: @@
 =Brushup of dnsmasq Config=
-Updated the dnsmasq config file to the one shown here.
+[[Ubuntu/Bespin/Dnsmasq]]
-Key changes:
-* Specifying the interfaces and listen addresses together (only need one or the other, but just to be sure)
-* Using the expanded notation for the server keyword, and using it to specify which DNS nameserver to use for traffic from different sources. Now different LANs can use different DNS.
-<code>/etc/dnsmasq.conf</code>
-<pre>
-# don't send external traffic that is missing a domain
-domain-needed
-# don't send external traffic that has bogus private ip
-bogus-priv
-## set the local domain
-#domain=anon
-#local=/anon/
-# listen on these interfaces and only these interfaces
-interface=lo
-listen-address=127.0.0.1
-interface=wlan1
-listen-address=192.168.10.1
-bind-interfaces
-# define range of IP addresses to hand out
-dhcp-range=192.168.10.100,192.168.10.150,255.255.255.0,24h
-# don't read /etc/resolv.conf
-no-resolv
-# define what to do if no name resolution
-# the notation for server used here is
-# <dest-ip>/<src-ip>
-# local dns queries use pihole dns server
-server=127.53.0.1/127.0.0.1
-# lan10 dns queries use pihole dns server
-server=127.53.0.1/192.168.10.1
-## lan20 dns queries use google
-#server=8.8.8.8/192.168.20.1
-# send dnsmasq logs to a single place
-log-facility=/var/log/dnsmasq.log
-</pre>
 =Iptables Reconfiguration=

Ubuntu/Bespin: Difference between revisions