RaspberryPi/Wireless

To connect to a WPA wireless network from a Raspberry Pi:

First add network configuration to /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="Your SSID Here"
    proto=RSN
    key_mgmt=WPA-PSK
    pairwise=CCMP TKIP
    group=CCMP TKIP
    psk="YourPresharedKeyHere"
}

Next edit /etc/network/interfaces and modify the wlan0 entry.

If you have a static IP:

# ------ Static IP --------
###allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet static
    address 10.1.2.20
    netmask 255.255.255.0
    network 10.1.2.0
    gateway 10.1.2.1

If you have an automatically-assigned IP from the DHCP controller:

# ------- DHCP ------------
###allow-hotplug wlan0
iface wlan0 inet manual
wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf
iface default inet dhcp